Konfigurierbarer Export

Dies ist eine technische Dokumentation für das konfigurierbare Goobi Export Plugin. Es ermöglicht, den Export mithilfe der Projektkonfiguration anzupassen. Durch die Verwendung von Exportprojekten ist

Einführung

Die vorliegende Dokumentation beschreibt die Installation, Konfiguration und den Einsatz eines Export-Plugins in Goobi.

Mithilfe dieses Export-Plugins für Goobi können die Goobi-Vorgänge innerhalb eines Arbeitsschrittes gleichzeitig an mehrere Orte exportiert werden.

Installation

Dieses Plugin wird in den Workflow so integriert, dass es automatisch ausgeführt wird. Eine manuelle Interaktion mit dem Plugin ist nicht notwendig. Zur Verwendung innerhalb eines Arbeitsschrittes des Workflows sollte es wie im nachfolgenden Screenshot konfiguriert werden.

Das Plugin muss zunächst in folgendes Verzeichnis kopiert werden:

/opt/digiverso/goobi/plugins/export/plugin_intranda_export_configurable.jar

Daneben gibt es eine Konfigurationsdatei, die an folgender Stelle liegen muss:

/opt/digiverso/goobi/config/plugin_intranda_export_configurable.xml

Konfiguration

Die Konfiguration des Plugins erfolgt über die Konfigurationsdatei plugin_intranda_export_configurable.jar und über die Projekteinstellungen. Die Konfiguration kann im laufenden Betrieb angepasst werden. Im folgenden ist eine beispielhafte Konfigurationsdatei aufgeführt:

<?xml version="1.0" encoding="UTF-8"?>
<config_plugin>
	<!-- order of configuration is: 
	1.) project name matches 
	2.) project is * -->
	<config>
		<project>Manuscript_Project</project>
		<!-- List of folders that are included in the export. Each option can be included with the element attribute. -->
		<includeFolders>
			<!-- By default, all images in media will be exported to a _media folder, in master to a _master, etc. -->
			<media enabled="true" />
			<master enabled="true" />
			<source enabled="false" />
			<import enabled="false" />
			<export enabled="false" />
			<itm enabled="false" />
			<!-- By default all ocr folders are exported. If the optional and repeatable sub-element 'sourceFolderSuffix' is specified, only the folders 
			with the explicitly configured suffix will be copied. -->
			<ocr enabled="true">
				<!-- Export ocr folders whose names end with 'txt' or 'alto'. -->
				<sourceFolderSuffix>txt</sourceFolderSuffix>
				<sourceFolderSuffix>alto</sourceFolderSuffix>
			</ocr>
			<validation enabled="false" />
		</includeFolders>
	</config>
	
	<config>
		<project>Archive_Project</project>
		<!-- For all folders except 'ocr' configured inside the element 'includeFolders', one can use a sub-element 'destinationFolder' to configure whether a default export
		or a configured export should be used. For 'ocr' folders this does not apply, since 'ocr' folder may contain folders in itself, which makes this configuration nonsense. -->
		<includeFolders>
			<!-- If any sub-element 'destinationFolder' is configured, then the default export will be replaced with a configured export. -->
			<!-- The sub-element 'destinationFolder' is optional and repeatable. -->
			<!-- For any configured sub-element 'destinationFolder', the attribute '@name' is MANDATORY, while the attribute '@exportFileRegex' is optional. -->
			<media enabled="true">
				<!-- If the sub-element 'destinationFolder' has no '@exportFileRegex' attribute, then an empty folder with the configured '@name' will be created if it does not exist yet. -->
				<destinationFolder name="Images" />
				<!--
				<destinationFolder name="Survey Forms" exportFileRegex=".*Survey Form.*" />
				<destinationFolder name="Images/PLINExterior" exportFileRegex=".*Exterior.*" />
				-->
			</media>
			<master enabled="true" >
				<!-- If the sub-element 'destinationFolder' has both attributes configured, then a folder with the configured '@name' will be created if it does not exist yet,
				and all files whose names match the configured regular expression will be copied into that new folder. -->
				<destinationFolder name="Files_ending_with_1/files" exportFileRegex=".*1\..*" />
				<!-- ATTENTION: the regular expression configured here should be of JAVA style. -->
				<destinationFolder name="Files containing 7" exportFileRegex=".*7.*" />
			</master>
			<source enabled="false" />
			<import enabled="false" />
			<export enabled="false" />
			<itm enabled="false" />
			<!-- By default all ocr folders are exported. If the optional and repeatable sub-element 'sourceFolderSuffix' is specified, only the folders 
			with the explicitly configured suffix will be copied. -->
			<ocr enabled="false">
				<!--
				<sourceFolderSuffix>txt</sourceFolderSuffix>
				<sourceFolderSuffix>alto</sourceFolderSuffix>
				-->
			</ocr>
			<validation enabled="false" />
			<!-- To make a generic folder configuration work, one also has to configure the goobi_config.properties. -->
			<!-- The element 'genericFolder' is optional and repeatable. -->
			<!-- ATTENTION: all folders configured inside 'genericFolder' will be exported, and there is no '@enabled' attribute to configure that. Make sure that all folders are
			also correctly configured in the goobi_config.properties, otherwise it would be problematic. -->
			<genericFolder>
				<!-- In order to use 'some_folder' to configure a generic folder, say 'some_image_folder', one has to configure the goobi_config.properties in the following way: -->
				<!-- process.folder.images.some_folder=some_image_folder -->
				<!-- The path to this 'some_image_folder' should be '{imagepath}/some_image_folder', e.g. /opt/digiverso/goobi/metadata/27/images/some_image_folder -->
				some_folder
				<!-- No attribute '@exportFileRegex' configured, create an empty folder with '@name' if it does not exist yet. -->
				<destinationFolder name="empty_folder" />
				<destinationFolder name="first" exportFileRegex="^1.*" />
				<destinationFolder name="second" exportFileRegex="^2.*" />
				<destinationFolder name="txt" exportFileRegex=".*\.txt" />
			</genericFolder>
			<genericFolder>
				anotherFolder
				<destinationFolder name="third" exportFileRegex="3.*" />
			</genericFolder>
		</includeFolders>
	</config>
	
	<config>
		<project>*</project>
		<!-- An export is triggered for each 'target' condition that applies. If no 'target' condition is set, then a normal export will be performed. -->
		<!-- The 'target' element is optional, but if configured, then all three attributes are MANDATORY: -->
		<!-- 1. The '@key' attribute accepts a Goobi variable of the form '{meta.metadata name}'. -->
		<!-- 2. The '@value' attribute will be used to specify the desired value of '@key'. If set "", then the condition will be met if the metadata is empty or not set. -->
		<!-- 3. The '@projectName' attribute should contain the name of the export project with whose settings the export is to take place. If set "", then the settings
		of the project of the operation will be used for export. -->
		<target key="{meta.ViewerInstance}" value="eivfaanddigihub" projectName="eivfExportProject" />
		<target key="{meta.ViewerInstance}" value="eivfaanddigihub" projectName="gihubExportProject" />
		<target key="{meta.ViewerInstance}" value="" projectName="" />
		<!-- Whether any existing MARC-XML data should be embedded in the exported metafile. If not configured, then the default value false will be used. -->
		<includeMarcXml>false</includeMarcXml>
		<!-- List of folders that are included in the export. Each option can be included with the element attribute. -->
		<includeFolders>
			<media enabled="false" />
			<master enabled="false" />
			<source enabled="false" />
			<import enabled="false" />
			<export enabled="false" />
			<itm enabled="false" />
			<!-- Use default settings to export all ocr folders. -->
			<ocr enabled="true" />
			<validation enabled="false" />
		</includeFolders>
	</config>
</config_plugin>

Der Block <config> ist wiederholbar und kann so in unterschiedlichen Projekten verschiedene Metadaten definieren. Der Block mit <project>*</project> wird angewendet, wenn kein Block mit der Projektbezeichnung des Projektes existiert.

Der folder-Block

Der includeFolders Block befindet sich innerhalb von jedem config-Element. Er steuert, welche Verzeichnisse für den Export berücksichtigt werden sollen.

Wird das jeweilige Attribut enabled als false konfiguriert wird, findet kein Export des entsprechenden Ordners statt.

Die Konfiguration des Zielordners kann innerhalb der Projekteinstellungen in der Nutzeroberfläche von Goobi workflow vorgenommen werden. Wenn dort die Checkbox für Erzeuge Vorgangsverzeichnis gesetzt ist, wird der Vorgang in einen Unterordner mit seinem Titel als Namen im Zielverzeichnis abgelegt.

Last updated